10 Ton Gas-fired Hot Water Boilers for Sale

10 ton gas-fired hot water boiler is arranged in a offset furnace with a wet back. The high-temperature flue gas passes through the second and third return flue pipes successively, and then enters the atmosphere through the chimney in the back flue chamber. The boiler is equipped with automatic proportional regulation, automatic feed water regulation, program start and stop, automatic operation and other advanced technologies, and has the operation of water temperature control, overtemperature, overpressure flameout and other automatic protection functions. The boiler is characterized by compact structure, reliability, and simple operation, quick installation, less pollution, low noise and high efficiency. It is widely used for industrial steam, life and heating in enterprises, hotels, office buildings, civil buildings and other facilities.

30ton szs gas fired steam boiler

How much natural gas does a 10-ton gas-fired hot water boiler consume in 24 hours? The calculation formula of gas consumption of a natural-gas boiler in 24 hours is as follows: Calorific value gas boiler power 24 * * time/fuel/gas boiler heating value utilization, assumes that natural gas heating value was 36.22 MJ/Nm3 gas thermal efficiency is 99%, a gas boiler can be 10 tons per hour to 710 cubic meters of natural gas, so the boiler running 24 hours of natural gas consumption is 17040 cubic (usually commonly used in hot water heating, boiler just run around 10 hours a day, or according to the requirements of the temperature to adjust the running time, don’t have to run 24 hours a day.

Features of 10 ton gas-fired hot water boiler

1. The use of microcomputer controls system, automatic ignition, and the use of advanced variable speed technology to automatically control the air volume, heating quickly. It has the functions of temperature setting, cycle control, time setting, automatic furnace sealing, and fault alarm and so on.
2. In the closed high temperature state after the gasification combustion process, the boiler reasonable design structure to make the gasification process of fuel stable full, safe, and equipped with a special economizer, so that the boiler thermal efficiency up to more than 98%.
3. Fuel smokeless and safe combustion, with emissions meeting the emission requirements of Class I regions.
4. Excellent thermal insulation performance, boiler adopts overall thermal insulation to reduce heat loss.
5. Easy to install, boiler small volume, no tall chimney, easy to install.
6. Can be used for a variety of fuels, such as natural gas, gas, but also can burn methane, liquefied gas, blast furnace gas, etc.

wns gas-fired hot water boiler

Both THE WNS and SZS series of oil-fired and gas-fired boilers designed and produced by ZOZEN adopt large furnace design, with thermal efficiency of over 98% and NOx emission as low as 30mg/Nm3. The front and rear smoke boxes adopt the seal structure created by ZOZEN to ensure no leakage of smoke. At the same time, it has the characteristics of fully automatic and safe operation. The models of the 10-ton gas boilers provided by ZOZEN boiler include WNS7-0.7/95/70-Q, WNS7-1.0/95/70-Q, WNS7-1.25/95/70-Q, SZS7-1.0/95/70-Q, WNS7-1.0/95/70-Q, WNS7-1.0/115/70-Q, etc. Different types of boilers, boiler pressure, and auxiliary machines and so on are the main factors affecting the boiler price, if you need oil and gas boilers can provide the demand to our online customer service.